Household Heating supplies a wide range of central heating products and replacement components for domestic heating systems. Our catalogue includes motorised valves, thermostats, programmers and time switches, Wi-Fi room thermostats for advanced control, water treatment chemicals, and flue terminal guards, helping homeowners and installers maintain and control heating systems efficiently.
Each product is presented with clear specifications to make it easier to identify compatible parts and choose the right solution for your heating installation. Where available, installer and user instructions are provided to support correct selection, installation, and ongoing use, with access to a searchable product instruction library.
A compact Wi‑Fi time switch intended to add smartphone and voice control to an existing boiler or immersion heater. It offers up to 15 on/off programmes (1‑minute minimum), a manual override button, volt‑free SPDT switching and connection via the Smart Life app (2.4 GHz Wi‑Fi). Suited to simple retrofit use where timed switching — not temperature modulation — is required.


A compact 7‑day digital fused‑spur timer for single‑gang pattress installation, offering 24 on/off events, a double‑pole isolator and a removable BS1362 13 A fuse caddy. It’s designed for permanently wired resistive loads (13 A) and includes an internal rechargeable cell (≈200 hours) to retain settings during power loss.


A compact touchscreen room thermostat with both 868 MHz RF and 2.4 GHz Wi‑Fi, the OP‑WFSTAT pairs a battery‑powered wall stat with a mains receiver to provide four daily heating periods, remote control via the Smart Life app and either volt‑free relay switching or OpenTherm modulation for compatible boilers.
It’s best suited to single‑zone domestic systems where simple app control and an easy‑to‑install wireless stat are needed without the complexity of a larger smart hub.


A single‑socket UK smart plug (Status SS1GWIFIPLUGB18) that adds app control, scheduling and energy metering to a standard BS1363 outlet. It connects over 2.4GHz Wi‑Fi, works with the Smart Life app and supports Amazon Alexa voice control. Rated 220–240V, 50Hz, 13A (max 2990W), it’s a low‑cost option for automating lights and everyday appliances within that load limit.


A trade‑style radiator valve pack containing a liquid‑filled thermostatic head on a reversible angled body, plus a matching chrome lockshield, 1/2″ BSP tails and 15mm olives. It provides simple, local temperature control (≈7–28°C), frost protection and flexible mounting for most standard domestic radiators and towel rails.

A complete angled TRV pack in black, the Tower TRV4PACK‑B contains a liquid‑filled thermostatic head, reversible angled valve body and matching lockshield with the fittings to suit 10–15mm radiator pipework. It provides simple, reliable mechanical temperature control (approx. 7°C–28°C) for standard domestic heating systems.


A compact Wi‑Fi time switch intended to add smartphone and voice control to an existing boiler or immersion heater. It offers up to 15 on/off programmes (1‑minute minimum), a manual override button, volt‑free SPDT switching and connection via the Smart Life app (2.4 GHz Wi‑Fi). Suited to simple retrofit use where timed switching — not temperature modulation — is required.


A compact DIN‑rail Wi‑Fi timeswitch for a single mains output, the Optimum OP‑DRWF01 gives 24‑hour and 7‑day scheduling via an iOS/Android app, internet time synchronisation and Alexa/Google Home voice control. It’s aimed at domestic and light‑commercial use where a discreet, in‑board timer is needed for heating circuits, pumps, fans or lighting, provided the loads are within the 16 A resistive / 4 A inductive ratings.


A single‑gang, Wi‑Fi enabled socket‑box timeswitch that fits a standard pattress. The OP‑SBWF01 provides Smart Life app and voice control, 24‑hour or 7‑day scheduling with up to 15 on/off programmes and a volt‑free SPDT contact rated 16 A resistive (4 A inductive). It’s suited to internal domestic or light‑commercial control where neat wall mounting and app‑based scheduling are required.


A compact wall‑mounted two‑channel Wi‑Fi timeswitch (Optimum OP‑SBWF02) that fits a standard single pattress box and provides two independently scheduled 230V outputs. It’s aimed at domestic and light commercial uses where remote app control, local override buttons and voice assistant integration are useful — but note the modest 5A per‑channel rating and indoor‑only installation requirement.


A compact, pattress‑mounted 3‑channel Wi‑Fi timeswitch (model OP‑SBWF03) that gives independent scheduling and manual override for three 230V outputs. It’s designed for domestic and light commercial use — ideal for hot water and multi‑zone heating control or small pumps — but each channel is limited to 5 A resistive so heavier or inductive loads will need a contactor.


A compact touchscreen room thermostat with both 868 MHz RF and 2.4 GHz Wi‑Fi, the OP‑WFSTAT pairs a battery‑powered wall stat with a mains receiver to provide four daily heating periods, remote control via the Smart Life app and either volt‑free relay switching or OpenTherm modulation for compatible boilers.
It’s best suited to single‑zone domestic systems where simple app control and an easy‑to‑install wireless stat are needed without the complexity of a larger smart hub.


A single‑socket UK smart plug (Status SS1GWIFIPLUGB18) that adds app control, scheduling and energy metering to a standard BS1363 outlet. It connects over 2.4GHz Wi‑Fi, works with the Smart Life app and supports Amazon Alexa voice control. Rated 220–240V, 50Hz, 13A (max 2990W), it’s a low‑cost option for automating lights and everyday appliances within that load limit.


A compact, ERP‑compliant permanent‑magnet circulator for domestic central‑heating systems. The APUMPHE offers a 1.5″ G1 (BSP) flange with 130 mm port spacing, a maximum head of 6 m and up to 3.0 m³/h flow; an internal differential‑pressure controller lets it auto‑modulate between low and high power to cut running costs and noise.


A compact bronze‑body hot‑water recirculation pump that combines corrosion‑resistant construction with a high‑efficiency permanent‑magnet motor and an automatic differential‑pressure controller. Designed for domestic secondary return loops, it delivers instant hot water to distant outlets while keeping electricity use low (auto‑adapting roughly 5–45 W) and operating quietly.
Best paired with a short‑run timer and a pipe thermostat on the return loop to reduce running hours and avoid unnecessary tank cycling.


A compact replacement powerhead for 3‑port mid‑position valves used in domestic Y‑plan heating. The Tower A3MID is a synchronous motor actuator with spring return, a built‑in auxiliary switch and a 1‑metre 5‑core cable; it fits VAL322MP/VAL328MP valve bodies and is commonly used as a like‑for‑like swap for V4073A‑style powerheads.


A compact, drop‑in synchronous motor intended as a replacement for the motor inside many 2‑port and 3‑port spring‑return valve heads. It uses a standard teardrop mounting and pinion output, runs from 220–240V AC at 50Hz and provides a slow 4 RPM, ~6W output suitable for restoring valve actuation in domestic central‑heating systems.


A practical 22mm two‑port motorised zone valve for domestic heating systems with 220–240V AC operation, a low‑power (6W) synchronous actuator and spring‑return fail‑safe action. It includes a 1m pre‑wired 5‑core cable and an auxiliary (end) switch for boiler/pump interlock, making it well suited to standard fully‑pumped central‑heating zones.


A simple 28mm 2‑port motorised zone valve for domestic and light commercial heating systems. It runs from 220–240V AC, draws about 6 W, and includes a 1 m cable, manual override and a 3 A auxiliary end switch for boiler/pump interlock. The VAL228MV is best where you need reliable on/off zoning and easy replacement or servicing.


A compact 22 mm 3‑port mid‑position motorised valve for fully pumped domestic heating systems. The VAL322MP uses a low‑power 230/240 V spring‑return actuator with a built‑in switched output to control heating, hot water or both when used with conventional room and cylinder thermostats and a programmer.
It is supplied with a 1 m pre‑wired cable, compression fittings and a manual lever for commissioning; suitable for typical UK homes where pipework and pump head match the valve’s 1 bar differential and 10 bar static ratings.


A three‑port mid‑position motorised valve for fully pumped domestic heating systems. The VAL328MP uses a replaceable synchronous actuator and 28mm compression body to route boiler flow to heating, hot water or both; it runs from 220–240V AC, consumes 6W and includes a 1m five‑core cable and manual override for commissioning.


A compact replacement actuator head for Tower two‑port zone valves (VAL222MV 22mm and VAL228MV 28mm). The A2PORT is a synchronous motor, spring‑return unit with a 1 m 5‑core cable and an auxiliary switch (3 A resistive), designed to be fitted without draining the system.


A pair of anthracite-finish manual corner radiator valves (Tower product code MRVC-A) designed for 15mm pipework and 1/2″ BSP radiator inlets. They give a discreet, right-angled connection for wall- or floor-entry pipework and are specified for domestic systems up to 120°C and 10 bar.


A compact dual‑fuel corner valve set for ladder towel rails that lets the same radiator be served by central heating or an electric element. Brass construction with a polished chrome finish; 15mm compression to the pipes and 1/2″ BSP tails to the radiator. Supplied as an angled valve pair to simplify installation and avoid a separate T‑piece.

A pair of straight manual radiator valves in hand‑polished chrome (product code MRVMST). They provide simple on/off and flow control for radiators where the supply pipe runs vertically or from the floor and are specified for 15 mm pipe to a 1/2″ BSP radiator connection, with a 120°C / 10 bar maximum rating.


A twin pack of matt‑black straight manual radiator/towel‑rail valves finished in a round style and made from brass. They use 15mm compression inlets and 1/2″ BSP radiator tails, so they’re a simple, style-conscious replacement for radiators or towel rails with inline or floor‑rising pipework. These are manual valves (not thermostatic) and supplied as a pair.


A ready-to-fit corner TRV and lockshield pack for through‑the‑wall radiator installations. It supplies a chrome/white thermostatic head, reversible corner valve body, lockshield, 1/2″ BSP tails and 15mm olives so you can tidy a radiator where the pipework exits the wall.
Suitable for most domestic radiators and towel rails; the TRV offers multiple settings with frost protection and the valve body is rated for typical household heating pressures. Check pipe and tail dimensions on site before ordering to be safe.


A compact brass tee designed for dual‑fuel radiator and towel‑rail installations, the Tower TPC series (TPC‑A Anthracite, TPC‑B Black, TPC‑C Chrome) provides a 1/2″ BSP port for an electric heating element alongside a TRV or blanking plug. O‑ring seals remove the need for PTFE tape; installation can be horizontal or vertical. Electrical connections must be made by a qualified electrician and protected by a 30 mA RCD.


A chrome TRV and lockshield pack designed for standard domestic radiators, the set provides liquid‑sensor thermostatic control and a matching lockshield that suit 15mm pipework and can accommodate 10mm with reducers. It offers a 7°C–28°C control range, reversible body for flow or return and a tidy chrome finish for simple replacement or new installs.

A practical TRV and lockshield pair in white (thermostatic head) with chrome bodies, supplied to suit 10 mm or 15 mm pipework. The reversible TRV head (7°C–28°C) and included 10 mm reducer make this a straightforward, low‑cost option for domestic radiator installations or like‑for‑like replacements.

A straight thermostatic radiator valve and matching lockshield in polished chrome for 15mm pipework. The mechanical TRV head uses a liquid sensor to regulate room temperature between about 7°C and 28°C, while the lockshield allows the radiator to be balanced by an installer. It’s a simple, trade‑style pack for standard inline radiator connections.

A straight inline thermostatic radiator valve and matching lockshield in a white head / chrome body finish, supplied as a twin pack for 10–15 mm pipework. The mechanical TRV uses a liquid-filled sensor (7°C–28°C) and a reversible valve body for fitting on either flow or return; it’s a basic, reliable option for manual per-radiator temperature control.

A trade‑style radiator valve pack containing a liquid‑filled thermostatic head on a reversible angled body, plus a matching chrome lockshield, 1/2″ BSP tails and 15mm olives. It provides simple, local temperature control (≈7–28°C), frost protection and flexible mounting for most standard domestic radiators and towel rails.

A complete angled TRV pack in black, the Tower TRV4PACK‑B contains a liquid‑filled thermostatic head, reversible angled valve body and matching lockshield with the fittings to suit 10–15mm radiator pipework. It provides simple, reliable mechanical temperature control (approx. 7°C–28°C) for standard domestic heating systems.


A compact anthracite TRV pack that combines a liquid‑filled thermostatic head on a reversible angled brass valve body with a matching lockshield and the fittings needed for most 15mm/1/2″ domestic radiator connections. It offers simple, stable temperature control (0–5 dial, 7–28°C range) and a frost‑protection setting — a tidy choice when matching dark, contemporary radiators or towel rails.


A chrome corner thermostatic radiator valve pack from Tower that supplies a liquid‑filled TRV head, reversible angled valve body, matching corner lockshield and 1/2″ BSP tails with 15mm olives. It’s designed for standard domestic 15mm pipework, offers a 0–5 control range (approx. 7–28°C) plus frost protection, and can be fitted on flow or return in horizontal or vertical orientations.


A black corner thermostatic radiator valve pack that pairs a liquid‑filled TRV head with an angled, reversible valve body and matching corner lockshield. It’s designed for 15mm domestic pipework with 1/2″ BSP tails, offers a control range of about 7°C–28°C with frost protection, and is finished in durable black powder coat for use on contemporary radiators and towel rails.


A corner-mounted thermostatic radiator valve pack finished in anthracite, combining a liquid-sensor TRV head with a reversible angled valve body and matching lockshield. It’s designed for standard 15 mm domestic pipework (1/2″ BSP tails), offers a temperature range of about 7°C–28°C with frost protection, and includes decorator caps and a 10 mm reducer kit for flexible installation.


Explore Premium Heating Controls & Plumbing Essentials
TCTRVCCW Corner Chrome TRV Pack
£21.95
TRV4PACK-B Angled TRV Pack Black
£21.95
TRV4PACK Angled TRV Pack
£16.50
TRV4PACKAN Angled Anthracite TRV Pack
£21.95
Boiler Overflow Guard 16"
£22.99
Affiliate Disclaimer: As Amazon Associates, we earn from qualifying purchases. This means that if you click on an Amazon link on this site and make a purchase, we may receive a small commission at no additional cost to you. Please note that this helps support the site and allows us to continue providing helpful content. Thank you for your support!
Some links on this page may be affiliate links. This means we may earn a commission if you buy through our links, at no extra cost to you. Our aim is to keep comparisons clear, practical and useful.