Tower
Showing 25–48 of 60 results
-
£11.68A compact central‑heating chemical pack containing a concentrated system cleanser and an inhibitor. It’s intended for domestic systems: one 0.5‑litre dose is stated to treat about 100 litres (roughly 10 radiators). Apply via the header tank on open systems or via a radiator on sealed systems.
Before use, confirm compatibility with your boiler and request the supplier’s safety data sheet if the manufacturer is not clearly identified.
Inhibitor & Cleanser Pack
£11.68 View Product
Quick View -
£36.50A compact in-line magnetic filter for 22mm domestic heating pipework. It uses a 9,000-gauss neodymium magnet plus a mechanical strainer to remove magnetic and larger non‑magnetic debris, and is supplied with 22mm brass compression fittings and a low-level drain for simple servicing.
Best suited to apartments, small bungalows and other space‑constrained installations where a full-size filter would not fit.
MFILT Mini Magnetic Filter
£36.50 View Product
Quick View -
£34.49A compact replacement powerhead for 3‑port mid‑position valves used in domestic Y‑plan heating. The Tower A3MID is a synchronous motor actuator with spring return, a built‑in auxiliary switch and a 1‑metre 5‑core cable; it fits VAL322MP/VAL328MP valve bodies and is commonly used as a like‑for‑like swap for V4073A‑style powerheads.
Mid-Position Valve Actuator
£34.49 View Product
Quick View -
£15.99A strap‑on single‑pole changeover thermostat for pipework and hot‑water cylinders, the PCS offers a wide 10–90°C setting range, a fixed ~5°C differential and a 16(4) A switching rating at 250 V AC. It’s built for indoor plant‑room and cupboard use and is intended to switch pumps, valves or auxiliary heating equipment where surface temperature sensing is appropriate.
PCS Pipe / Cylinder Thermostat
£15.99 View Product
Quick View -
£6.25A simple, clip‑on plastic shroud and matching collar system for tidying visible 15mm radiator and towel‑rail pipework. Available in 130mm, 200mm and 300mm lengths and finished in polished chrome, anthracite, matt black or bright white to coordinate with valves and radiators.
Quick to install and easy to trim on site; collars are supplied for a neat 55mm finishing ring and are available separately in trade packs.
Plastic Pipe Shrouds and Collars
£6.25 View Product
Quick View -
£21.89A compact 22mm pressure‑reducing valve from the Trade‑Tec (Intatec) range, the PRVG22 reduces mains pressure to protect boilers and hot‑water systems. It comes with a fitted gauge and 15mm reducing adapters, is WRAS‑listed on supplier pages and is factory‑preset (typically to c.3 bar) with an adjustable outlet up to 6 bar — suited to standard domestic and light commercial installations.
Pressure Reducing Valve
£21.89 View Product
Quick View -
£21.19A simple wire‑cage flue guard from the Tower (TFC) TGD family designed to protect rectangular boiler terminals. Available in Zinc & passivated, JS500 (for oil), brown plastic coated (for condensing boilers) and stainless steel finishes — choose the finish to match your flue type and exposure. Confirm the guard size against the terminal dimensions before ordering.
Rectangular Terminal Guards
£21.19 View Product
Quick View -
£14.95The Tower SA1/2 is a WRAS‑approved, point-of-use mini expansion vessel (0.16 L) with a 1/2″ BSP connection, pre-charged to 3–3.5 bar. It’s designed to absorb short pressure spikes from fast-closing valves — ideal for installers who need a compact, potable-water solution to reduce water hammer at appliances in tight spaces.
Shock Arrestor
£14.95 View Product
Quick View -
£7.95A straight brass push‑fit reducer from Tower that adapts 15mm radiator valves or lockshields to 10mm plastic pipe. Available in Chrome (STC1, supplied in pairs), Anthracite (STC1‑A, single) and Black (STC1‑B, single), it’s designed for water‑based central heating and offers quick, tool‑free installation with rated temperature and pressure limits for domestic systems.
STC1, STC1-A & STC1-B Straight Connectors
£7.95 View Product
Quick View -
£13.50A pair of straight manual radiator valves in hand‑polished chrome (product code MRVMST). They provide simple on/off and flow control for radiators where the supply pipe runs vertically or from the floor and are specified for 15 mm pipe to a 1/2″ BSP radiator connection, with a 120°C / 10 bar maximum rating.
Straight Radiator Valves
£13.50 View Product
Quick View -
£13.88A twin pack of matt‑black straight manual radiator/towel‑rail valves finished in a round style and made from brass. They use 15mm compression inlets and 1/2″ BSP radiator tails, so they’re a simple, style-conscious replacement for radiators or towel rails with inline or floor‑rising pipework. These are manual valves (not thermostatic) and supplied as a pair.
Straight Radiator Valves Black
£13.88 View Product
Quick View -
£14.99A compact, dial‑operated mechanical room thermostat for simple on/off control of domestic heating. It uses a sealed bellows sensor to regulate room temperature between 10°C and 30°C (1°C differential) and is compatible with mains (230V AC) or low‑voltage/volt‑free switching — a low‑cost, robust choice where programmability or smart features aren’t required.
STTRS1 V2 Room Thermostat
£14.99 View Product
Quick View -
£11.95A compact, drop‑in synchronous motor intended as a replacement for the motor inside many 2‑port and 3‑port spring‑return valve heads. It uses a standard teardrop mounting and pinion output, runs from 220–240V AC at 50Hz and provides a slow 4 RPM, ~6W output suitable for restoring valve actuation in domestic central‑heating systems.
Synchronous Valve Motor
£11.95 View Product
Quick View -
£10.34A concentrated chemical treatment intended to reduce boiler noise caused by limescale on a heat exchanger. The 0.5-litre bottle (SKU TRIPCON4) treats a typical domestic system of about 100 litres (roughly 10 radiators) and is intended for use alongside a compatible corrosion inhibitor; it’s non‑acidic, suitable for systems containing aluminium and is designed to be left in the system once dosed.
System Silencer Concentrate
£10.34 View Product
Quick View -
£21.95A ready-to-fit corner TRV and lockshield pack for through‑the‑wall radiator installations. It supplies a chrome/white thermostatic head, reversible corner valve body, lockshield, 1/2″ BSP tails and 15mm olives so you can tidy a radiator where the pipework exits the wall.
Suitable for most domestic radiators and towel rails; the TRV offers multiple settings with frost protection and the valve body is rated for typical household heating pressures. Check pipe and tail dimensions on site before ordering to be safe.
TCTRVCCW Corner Chrome TRV Pack
£21.95 View Product
Quick View -
£31.95A compact 15 mm thermostatic mixing valve from TFC Group’s Tower range that blends hot and cold water to a tamper‑resistant set temperature (35–50 °C) with around ±2 °C accuracy. It’s chrome‑plated, supplied with 0.6 mm inlet filters and non‑return valves, and is suitable for typical domestic tempering duties where TMV2/TMV3 certification is not required.
THERMAL MIXING VALVE TMV 15mm
£31.95 View Product
Quick View -
£32.95A compact, trade‑grade thermostatic mixing valve with 22mm compression connections that blends hot and cold supplies to an adjustable, tamper‑resistant outlet (35–50°C). It includes 0.6mm inlet filters and non‑return valves and is designed to give stable mixed temperatures (±2°C) when installed within the stated supply temperature and pressure ranges.
Suited to under‑bath, basin or shower feed applications where a dependable, serviceable blending point is required — but not intended as a TMV2/TMV3 certified unit, so check compliance needs before specifying for regulated settings.
THERMAL MIXING VALVE TMV22 22mm
£32.95 View Product
Quick View -
£5.89A compact brass tee designed for dual‑fuel radiator and towel‑rail installations, the Tower TPC series (TPC‑A Anthracite, TPC‑B Black, TPC‑C Chrome) provides a 1/2″ BSP port for an electric heating element alongside a TRV or blanking plug. O‑ring seals remove the need for PTFE tape; installation can be horizontal or vertical. Electrical connections must be made by a qualified electrician and protected by a 30 mA RCD.
TPC – A, B, C Dual Fuel Tee Pieces
£5.89 View Product
Quick View -
£42.95A compact magnetic boiler filter supplied in two trade sizes (22 mm and 28 mm). The unit combines a strong 12,000‑gauss neodymium rod and a 530 ml collection chamber in a PA66 (30% glass‑filled) body, and is sold as TC‑Filter (22 mm) or TC‑Filter28 (28 mm). It’s intended to catch ferrous wear particles on the return pipe and is supplied with isolation ball valves and compression fittings for straightforward servicing.
TRADE03 22mm & 28mm Magnetic Filters
£42.95 View Product
Quick View -
£19.32A chrome TRV and lockshield pack designed for standard domestic radiators, the set provides liquid‑sensor thermostatic control and a matching lockshield that suit 15mm pipework and can accommodate 10mm with reducers. It offers a 7°C–28°C control range, reversible body for flow or return and a tidy chrome finish for simple replacement or new installs.
TRV Pack (chrome) Suit 10mm-15mm
£19.32 View Product
Quick View -
£19.29A practical TRV and lockshield pair in white (thermostatic head) with chrome bodies, supplied to suit 10 mm or 15 mm pipework. The reversible TRV head (7°C–28°C) and included 10 mm reducer make this a straightforward, low‑cost option for domestic radiator installations or like‑for‑like replacements.
TRV Pack (white) Suit 10mm-15mm
£19.29 View Product
Quick View -
£21.31A straight thermostatic radiator valve and matching lockshield in polished chrome for 15mm pipework. The mechanical TRV head uses a liquid sensor to regulate room temperature between about 7°C and 28°C, while the lockshield allows the radiator to be balanced by an installer. It’s a simple, trade‑style pack for standard inline radiator connections.
TRV Pack Inline (chrome)
£21.31 View Product
Quick View -
£18.99A straight inline thermostatic radiator valve and matching lockshield in a white head / chrome body finish, supplied as a twin pack for 10–15 mm pipework. The mechanical TRV uses a liquid-filled sensor (7°C–28°C) and a reversible valve body for fitting on either flow or return; it’s a basic, reliable option for manual per-radiator temperature control.
TRV Pack Inline (white)
£18.99 View Product
Quick View -
£16.50A trade‑style radiator valve pack containing a liquid‑filled thermostatic head on a reversible angled body, plus a matching chrome lockshield, 1/2″ BSP tails and 15mm olives. It provides simple, local temperature control (≈7–28°C), frost protection and flexible mounting for most standard domestic radiators and towel rails.
TRV4PACK Angled TRV Pack
Central Heating Products, Thermostatic Radiator Valves, TRV & Lockshields, Valves, Motors & Accessories£16.50 View ProductQuick View
